You know what’s cute?
A Christmas tree.
But it’s a little tricky.
This DIY tutorial shows you how to make a Christmas tree that you can hang on your wall and enjoy for months to come.
Step 1: Decide on your style.
This one’s easy.
It’s going to be a big tree, but you can change the shape to whatever you like.
Step 2: Cut a 3-inch piece of plywood.
Cut a large section from the top and attach the two pieces to each other.
Use the small section as a base and attach it to the top of the tree.
Step 3: Cut another 3-to-4-inch section from one side and attach that piece to the other.
It should look like this:Step 4: Attach the top layer of wood to the bottom layer of ply wood.
Now, it’s time to assemble the tree!
You can either lay it on the floor or place it in a closet.
Either way, this DIY tutorial demonstrates how to assemble a Christmas ornament and hang it on a wall.
Step 5: Attached to the tree, attach the wooden feet to it.
It might look a little rough and scratchy, but once it’s set, it’ll look great.
Step 6: Now, attach a large piece of ribbon to the ribbon that attaches to the wood.
It can either be attached to the end of the ribbon, or to the tip of the string.
You can also hang the ribbon from a hook attached to a string.
You can also attach a small piece of string to the back of the end and tie it off.
Step 7: Tie a knot in the ribbon at the top.
This knot will hold the ribbon up while you’re hanging the tree on the wall.
You’ll want to attach the string to a loop in the string and attach a second loop to the knot at the bottom.
You’ll want the string on the bottom of the knot to be long enough to go through the entire length of the rope.
Step 8: You can add a decorative bow or chain to the string that will be tied off at the end.
You want the knot so that the ends are facing you.
Make sure you leave enough room between the knot and the end so that you have room to tie it up with another knot.
Step 9: Attaching the string is simple: simply tie the ends of the chain or bow in place to the ends and the ends to the front of the loop on the string, then tie the string around the knot.
Now you can attach the ribbon or bow to the chain, making sure to tie the chain to both ends.
Step 10: Once the ribbon is tied off, the tree should look something like this.
Step 11: Now that the tree is hanging on the walls, it should be ready for decorating.
Here’s how you can decorate it:Step 12: Attachment of ribbon is done!
You’ll have a nice, cute Christmas tree hanging on your walls.
And since this is a DIY tutorial, you don’t need any special tools.
You could even use a little time-saving scissors and a string or bow and stringing machine to get it all done.